In either case the battery must be fully charged before taking out of service. In case of saisonal driven vehicles we recommend an external charging twice a year. ![]() – The level of charge of the battery can be checked by means of acid density or open circuit voltage measurement If the density of the acid is below 1.24 or 12,50V kg/l the battery must be recharged. ![]() – Do not put so-called additives into the battery acid. If a substantial water loss occurs, an expert should check the voltage regulator. – Check the acid levels regularly and if necessary top up with desalinated or distilled water. – Keep the surfaces of the battery clean and dry. In order to ensure maximum battery life, the following instructions should be followed: – When disconnecting the terminals, remove the cables in the reverse sequence to the above. – Now start the vehicle needing assistance for a maximum of 15 seconds. (Observe the instructions of the vehicle manufacturer.) Then connect the negative terminal of the assisting vehicle 3 with 4, the blank metallic point on the vehicle needing assistance, away from the battery. – When connecting the terminals, both vehicle engines must be switched off!įirst connect the two positive terminals 1 with 2. ![]() – Only connect batteries with the same nominal voltage. – Observe the instructions for use of the starter cables. in accordance with DIN 72 553) should always be used for giving starting assistance. – Therefore, it is essential that the following procedure be strictly observed when using starter cables! – Starting assistance from vehicle to vehicle can lead to voltage peaks during disconnection, which can damage or even destroy vehicle electronic systems. – In view of the sensitive electronic components in the vehicle, as a rule starting assistance should only be provided by means of a Banner Booster.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |